Why the LS4 engine has been replaced with a 6-cylinder engine

A 6-liter engine has replaced the LS3 engine that powered the LS5 sedan, and the LS6 SUV that powered its predecessor, the LS7.

The L6 engines were used in the LS8 sedan and the new LS6 crossover.

The 6- and 6-motor L6-powered cars can be found in all five of the new 2018 Jeep models.

The engines are powered by the same 6.2-liter turbocharged inline-four cylinder that powered Jeep’s original Grand Cherokee.

That cylinder is now a 6.0-liter V-6, which has been enlarged to make room for the 6-stroke.

The LS6 SUVs will also use the same engine.

The 2018 Jeep Wrangler and 2018 Jeep Grand Cherokee, both of which are built by Kawasaki Heavy Industries, have been equipped with the L6 LS6 engines since 2015.

The SUV models, however, have only received the new engine in the past year.

A similar engine was also used in a number of other vehicles produced by Jeep.

The engine was used in both the KLRX SUV and the KX6 SUV, which were both introduced in 2016.

The KX3, a KLR SUV and a KX4 SUV, were also equipped with L6 cylinder engines, but the KXL4 was the only SUV to be fitted with an 8.0L engine.

As with the 6.5L engines in the Jeep Cherokee, the 6L engines were also available in the 2016 Grand Cherokee and Grand Cherokee XJ.

The new engines are also equipped for an independent rear suspension system.

The next-generation Jeep Wranglers will have an all-wheel drive system.

“In a Jeep Wranger, you have four wheels and four tires on the ground,” said Doug DeLuca, the vice president of Jeep brand performance and sales.

“It makes it a much more stable platform.

You get a lot of performance from that.”

The new 6-horsepower LS6s are also available for the new 2017 Wrangler, which was introduced in the spring of 2019.

The 2016 and 2017 Wrangler models are the only two cars on the market to get the all-new engines.

The Jeep brand is planning to add 6-speed manual transmission versions of the Jeep Wraggers, but these vehicles will not be available until the end of 2019, when they are expected to become available in other models.

All of the 2018 Jeep Cherokee models are powered exclusively by the new 6L engine, which makes them more fuel efficient than the previous 6.4L engines.

According to the EPA, the new engines produce 392 horsepower and 398 pound-feet of torque.

They are rated at 190 horsepower and 205 pound-forces of torque in city driving and at 236 horsepower and 260 pound-force of torque at highway speeds.